Minimax ME35 / ME35T / ME35TR Specifications
Note : This is a summary only, for full technical details and possible unit configurations please contact us.
End Cutting Unit by Motor
With Motor cut at 90 on front & rear with cutting point using NEW COPYING DEVICE which ensures precise finishing.
Standard
Standard
End Cutting Unit with Radious Function
In place of standard end cutting this unit rounds off the edge banded panel carrying out a Radiused Edge
Standard
Trimming Unit (Superposed)
72mm diameter combined cutters for 2mm radius cutting & chamfered edges with the straight section for trimming up to 5mm solid strips with simple adjustment using two numerical read-outs.
Trimming Unit (In-Line)
High frequency motors, front rotating copiers and vertical copying device for an accurate positioning of tools with reference to the cutting point. The edge thickness is indicated by two numercial read-outs.
Standard
Standard
Standard
Rounding Unit
With High frequency motor driven directly from PC Control Panel
Standard
Optional
Edge Scraping Unit (2mm)
For the finishing of 2mm PVC/ABS Edges. Excellent vibration free finish. Chrome plated giving accurate positioning.
Optional
Optional
Edge Scraping Unit (3mm)
For the finishing of 3mm PVC/ABS Edges. Excellent vibration free finish. Chrome plated giving accurate positioning.
Brushing Unit
With two independent motors. Tilted vertically adjustment to optimize the cleaning & polishing action.
Optional
Optional
Optional
Glue Scraping Unit
Eliminates any excess glue in the joint between panel & edge for perfect cleaning.
Optional
Optional
Optional
Scoring Unit with Grooves Execution
For the execution of only through grooves on the upper side of the panel
Optional
Optional
Optional
Automatic Loading Device
For Edge Strips
Optional
Optional
Spare Glue Pot
Interchangeable with Glue pot mounted on the machine.
Optional
Optional
Optional
Spare Glue Pot for Polyurethane Glue
Interchangeable with Glue pot mounted on the machine equiped with Anti-Adherent treatment for Polyurethane glues.
Optional
Optional
Optional
Pre-Heating Device
Set in the machine before the gluing unit to heat the panels for better glue adhesion. Useful in cold working enviorments and/or Panels Stocked.
Optional
Optional
Optional
Anti-Adhesive Unit
This unit comes complete with two spraying guns and tank for the Anti-Adhesive liquid protecting Upper & Lower Panel.
Optional
Optional
Spray-Mist Device
Positioned before the glue scraper and/or brushes and improves the panel cleaning.
Optional
Optional
Optional
Single Phase
Change from standard three Phase
Possible with some Unit Restrictions
EDGEBANDER MODEL
MINIMAX
UNIT DESCRIPTION
ME35
ME35T
ME35TR
Pre-Milling Unit
With 80mm Diameter diamond tools allowing excellent panel finishing and consistency during pre-machining. Independent exhaust hood and 4 possible thickness removals with vertical adjustment of the unit even in the final sharpening phase. It isn`t indicated for the machining of "Formica" edges.
Standard
Standard
Glue-Pot
With Edge Loading and Pressure System.
Standard
Standard
Standard
End Cutting Unit by Guillotine
Guillotine cut at 90 on leading and trailing edge, Possible to exclude unit for solid slips through PC Control.